Best Micro Atx Motherboards for Ryzen

Best Micro Atx Motherboards for Ryzen – Out of the various motherboard form factors available in the market, micro ATX motherboards are considered to be the most popular ones. These offer almost as good performance as larger ATX boards while having a smaller size and a lower price tag. Thus, these are great for buyers on a budget as well as for small form factor computers. Hence, we have mentioned the best micro ATX motherboards above in this article.

All of them have been mentioned, along with major features and options. You can even find a comprehensive buying guide related to these micro ATX motherboards. And based on these factors, here is one of our most favorite micro ATX motherboard recommendations:


In this article we looked at some of the best micro ATX motherboards for Ryzen build. We looked at the latest, premium as well as budget motherboards that feaure the AM4 chipset for Ryzen Gen 1,2 and 3 processors.

1.MSI MPG Z490

Pros & Cons

Not that long ago, Intel introduced its 10th generation desktop PC segment processors. We reviewed the Intel Core i9-10900K and Intel Core i5-10600K. As is Intel’s way, we also got a new chipset and socket to go along with them. Today we are taking a look at a fully custom retail add-in-board partner motherboard based on the new Z490 chipset, MSI’s MPG Z490 Gaming Carbon WiFi motherboard, which is one of two motherboards we got access to alongside the CPU prior to the embargo date.

This motherboard is built for high performance and supports 10th Gen Intel processors. The MSI MPG Z490 Gaming Carbon WiFi was used for all of our review testings in the Core i9-10900K CPU review.

The MPG Z490 Gaming Carbon WiFi represents what I’d call a low to mid-range motherboard in the Z490 lineup

2.ASRock B450M PRO4

Pros & Cons

ASRock has a new value MATX board with the latest B450 chipset from AMD; it’s got everything you need and nothing you don’t.

The ASRock B450M Pro4 MATX motherboard has all the essentials. There are plenty of ports on the back and a PS/2 port for those with old school peripherals. You’ll find 4 SATA ports and 2 M.2 slots for storage, RGB headers for aesthetics and gigabit Ethernet for connectivity.

Whilst the audio is the Realtek ALC892 codec and not the ALC1220 we see on ‘gaming’ products it’s still going to be good enough for all but the most hardcore of gamers and it fits the price point well.

3.MSI MPG X570

Pros & Cons

The MPG X570 Gaming Plus has very little going for it outside of the adequate-capacity voltage regulator, though it does a fair job with the basics. We still get PCIe 4.0 to all the board’s slots, and the audio codec is the same ALC1220 we would expect to find on $200+ models. And that audio codec still feeds five rear-panel audio jacks and a front-panel HD Audio header, because there wouldn’t be much value to crippling it with cheaper connectors.

We also see a PS/2 port for legacy keyboards and mice, two USB 2.0 ports that we’ll assume are for contemporary keyboards and mice, four USB3 Gen 1 ports (5Gbps), Type A and Type-C Gen 2 ports (10Gbps), Gigabit Ethernet via a low-cost Realtek controller, and a digital optical audio output


Pros & Cons

Several years ago, the Asus TUF series of motherboards meant heavy cladding (Asus often called it armour) for protection, ample features, and a mid-range price point. Fast forward to today and the TUF brand, particularly in the laptop space, has shifted focus to lower-end gamers.

Things have changed in the motherboard realm as well. Gone is the armor, and we get more of a mainstream SKU at an entry-level price. In B550 form there are three Asus TUF-branded parts, the TUF Gaming B550-Plus, TUF Gaming B550M-Plus and Plus Wi-Fi that we’re looking at here.

They include TUF chokes and capacitors, along with a reinforced PCIe slot and ESD protection for the rear IO and LAN.

5.ASUS AM4 TUF X570-Plus

Pros & Cons

Asus’ TUF lineup has changed from the ultra-robust, heavy shielding it was known for in years past and has evolved more toward gaming-centric boards with protection on individual parts such as the PCIe and DIMM slots. ESD guards, additional surge protection measures and military-grade components are still a part of the TUF lineup, but the additional hardening went beyond what was necessary for most use cases.

These changes have made the Asus TUF Gaming X570-Plus Wi-Fi the second-least-expensive board in the Asus X570 product stack just missing the mark to be  our best motherboards pick in the budget X570 category.

6.ASUS ROG Strix B550-F

Pros & Cons

Asus’ B550 product stack currently consists of 11 boards that range in price from  (Prime B550M-A) up to the B550-E Gaming with an MSRP of . In between are several options that include boards from the ROG Strix, TUF, and Prime lineups. Within this lineup are ATX, Micro-ATX, and Mini-ITX size boards, all designed to support the latest AMD Ryzen processors.

Sitting second from the top of Asus’ B550 motherboards, the B550-F Gaming Wi-Fi includes 14-phase power delivery, 2.5 GbE LAN, integrated Wi-Fi 6 AX200, two M.2 slots (each with a heatsink), six SATA ports and premium audio, among other features.

7.MSI ProSeries AMD Ryzen

Pros & Cons

Boasting a 12.00 x 9.60 x 2.00 inches in design and weighing 2.65 pounds, this Motherboard is one of the MSI top designs. It is efficient, high performing, and compatible with the latest AMD Ryzen processors. It is built for high performance, stability, and longevity. It is compatible with any PC and is optimized for media and professional use.

Enjoy its usability across multiple Ryzen 3000 series processors, scalable graphic performance, and a core boost. This board will work perfectly with 1st, 2nd, and 3rd generation AMD Ryzen processors. It also has a flash BIOS button making it so much easier to flash any bios without installing a graphic card, CPU, or Memory.

8.ROG Maximus XIII Hero

Pros & Cons

There are four other ROG Gaming boards, Z590-E/-F/-A/-I(ITX), along with two TUF Gaming boards and three Prime boards on the budget end. Asus presents a well-rounded product stack with boards and price points for just about everyone from top to bottom.

Overall, performance on our Hero was the best out of the boards we’ve tested so far. Granted, the difference isn’t much between most of the higher-performing boards ( which bypass the Intel specification), but the Hero and its out-of-the-box settings lead the group.

Overclocking went without a hitch, easily handling our 5.1 GHz clock speed along with the memory set to DDR4 4000. Of the several boards we’ve looked at, this and the MSI MEG Ace were some of the easier boards to overclock and get the memory to speed with little or no tweaking.

9.EVGA X299 Micro

Pros & Cons

The X299 Micro has three full-length PCIe slots, supporting up to 2-way graphics. The physical slot configuration allows for a dual slot GPU to fit in the primary GPU slot (top) and the secondary just below it. Technically EVGA’s manual suggests support for SLI plus an additional PhysX graphics card, should single-slot GPUs be in play, with the third slot being a PCIe 3.0 x4 from the chipset.

For storage, between the PCIe slots is an M.2 slot, supporting both PCIe and SATA modules up to 80mm. In addition to the M.2, the X299 Micro also has a U.2 port below the six SATA ports. with all SATA, M.2, and U.2 lanes fed from the chipset.

The Micro has information voltage LEDs which note if there is an abnormal voltage detected. There are two additional LEDs in the same area that will light up depending on which processor is installed. It also includes power and reset buttons as well as a debug LED for POST codes (and temperatures once it goes through POST). EVGA mentions a 12-phase power delivery, and has a heatsink which looks like it can handle the load.


Pros & Cons

Intel’s H570 chipset is the mid-range option for more budget-focused motherboards. Usually, you’d choose a Z590 to get the most out of the best CPU for your custom PC, but an H570 motherboard can be a good choice if you don’t plan to go all-out with an Intel Core i9 processor. Here are our picks for best Intel H570 motherboards.

ASRock H570M-ITX/ac – motherboard – mini ITX – LGA1200 Socket – H570 | H570M-ITX/AC

Best Micro Atx Motherboards for Ryzen – BUYER’S GUIDE

1. Size

The ATX motherboards come in three different sizes. They are ATX, Micro ATX, and mini ATX. The ATX motherboards have the largest size with a dimension of 305x244mm.

Then comes the micro ATX with a dimension of 244x244mm. Lastly, the mini ATX motherboards are the smallest with a dimension of 170x170mm. Depending upon the size of your CPU, you should opt for the correct sized ATX motherboard.

2. RAM Capacity

The capacity of your motherboard is one of the main deciding parameters of your CPU’s performance. The ATX and micro ATX motherboards can support up to 4 RAM modules. On the other hand, a mini ATX motherboard can support up to only 2 RAM modules namely, 32 gigabytes and 16 gigabytes.

Even though the mini ATX motherboards have only 2 RAM modules, they are still good enough for gaming. However, when you have a higher budget and larger CPU, we recommend you to go for a micro ATX or ATX motherboard.

3. PCI-E Slots

This is one of the most important features that you should consider while buying a micro ATX motherboard. The PCI-E slots are used to mount graphics cards, sound cards, internal modems, and other external devices. So, always look for a motherboard with most PCI-E slots.

Generally, the ATX motherboards have 7 PCI-E slots and the micro ATX has 4. These slots should be sufficient for you to insert external devices. But, the mini ATX has only one PCI-E slot. Even in that, a heavy graphic card won’t fit into the slot.

4. Socket and Chipset

The chipset of a motherboard determines its compatibility with processors. So, you should first check the compatibility of your process and the chipset. It shouldn’t be a major problem since the chipsets support a wide range of AMD processors.

When it comes to the socket, AM4 is widely used with different chipsets. All the four micro ATX motherboards listed above come with AM4 sockets.

5. Storage options

When it comes to storage, always go with the maximum. For bulk storage needs, you either have to go with an HDD or SATA SSDThe micro ATX motherboards come with 4 to 6 SATA slots.

Additionally, some motherboards have 1 or 2 NVME slots. These can be used to install NVME SSDs. Always, choose a micro ATX motherboard that has the maximum slots to increase your storage capacity.

6. Ports

The ports allow you to connect your motherboard to external devices. Any motherboard that offers multiple high-speed ports is going to be highly practical and handy in the long run

Apart from basic audio ports, PS/2 port, USB 2.0 ports, VGA port, DVI-D port, ethernet port, you should also look out for high-speed USB 3.0 ports, USB Type C port, HDMI port, and others.

7. Warranty

The warranty on your motherboard is one of its most important aspects. No matter how robust your micro ATX motherboard maybe, it is still prone to damage. Most micro ATX motherboards come with a warranty period of 3 years.

Always choose a micro ATX motherboard that has the maximum warranty period. This would give you some peace of mind.

Frequently Asked Questions

What to Look For in a Micro ATX Motherboard?

Micro ATX motherboards might be great for saving you a bit of space and being cheaper than full-sized ATX motherboards, but you should know you’re making a few sacrifices. Chiefly these smaller boards often come with fewer PCIe slots—or even just one on certain models. So you should think about how many graphics cards, sound cards, capture cards, and other PCIe cards you want to install when deciding which mATX motherboard is right for you.

The smaller printed circuit board you get with mATX motherboards also means you’re probably going to have fewer M.2 slots for NVMe and SATA SSDs. The good news is most boards of this size have a least two M.2 slots, but don’t expect there to be four or five on some of the most premium ATX parts.


Best Micro Atx Motherboards for Ryzen –  When you’re picking out the gaming motherboard that will serve as the backbone of your gaming PC, it’s worth thinking about whether or not you need all the extras that come with a full-size ATX motherboard. Unless you’re planning to load up on PCIe add-in cards or do some wild overclocking, you’ll likely find that a Micro ATX motherboard will have everything you need to complete your build while also costing a good deal less than an ATX board.